한국의

한국의

Get a Quote
제품

핫 제품

회사 뉴스

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

게이트 밸브와 글로브 밸브의 차이점은 무엇입니까?
게이트 밸브와 글로브 밸브의 차이점은 무엇입니까?
2023-05-31

많은 사람들은 게이트 밸브와 글로브 밸브 모두 미디어를 차단하는 기능이 있으므로 사용할 때 다르지 않다고 생각합니다. 실제로 실제 적용에서 게이트 밸브와 글로브 밸브 사이에는 특정 차이점이 있습니다. 게이트 밸브 및 구조도 글로브 밸브 및 구조도 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and better sealing performance. In steam systems and large diameter pipelines, gate valves with low fluid resistance are usually

Triple Eccentric Metal Hard Seal Butterfly Valve의 가공기술 및 구조적 특성 원문보기 KCI 원문보기 인용
Triple Eccentric Metal Hard Seal Butterfly Valve의 가공기술 및 구조적 특성 원문보기 KCI 원문보기 인용
2023-05-24

트리플 편심 메탈 하드 씰 버터 플라이 밸브는 고성능 밸브로서 내식성, 안정적인 밀봉 및 작은 개방 토크와 같은 장점이 있습니다. 밀봉 표면은 경사진 원추형 표면이며 밸브 본체 밀봉 링과 나비 플레이트 어셈블리 밀봉 링 사이의 접촉은 표면 접촉입니다. 작동 원리는 구동 장치의 토크로 나비 판 어셈블리를 직접 구동하여 나비 판 어셈블리의 밀봉 링이 밸브 본체 밀봉 링에 완전히 접촉하여 탄성 변형을 일으켜 밀봉하는 것입니다. 구조적 특성 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

다섯 개의 백성 중 하나
加载中...

스테인리스 스틸 2 조각의 형 볼밸브 1-1/2 인치 800 파운드

의 F316,부동 공 벨브 설계에서 코드의 ASME B16.34. 밸브로 구성되어 있는 두 개의 조각 몸에 떠 있는 볼,레버 작동으로 좋은 신뢰할 수 있는 실링 성능과 작은 토크가 있습니다.

  • 지불:

    30% when order confirmed, 70% before shipment
  • 제품 원산지:

    China
  • 색:

    Customization
  • 배송 포트:

    Shanghai, China
  • 리드 타임:

    30~60 days Ex Works after order confirmation
  • Material:

    Stainless Steel F316
  • Method of Operation:

    Lever
지금 문의
제품 상세 정보

빠른 세부 사항

유형

볼 밸브

크기

1-1/2"

압력

800 파운드

건설

뜨 공 종류,두 개의 조각 몸

연결

FNPT

가동

레버

본체 재질

F316

디자인 표준

ASME B16.34

압력&Temp

ASME B16.34

얼굴

ASME B16.10

끝 연결

ANSI B1.20.1

검사

API598

온도 범위

-29℃~+150℃

미디어

기름,물,스

기능

F316 스테인레스 스틸 높은 내식성보다는 304 스테인리스 스틸. 그것은 포함 최대 3%몰리브덴,부식을 방지하는 데 도움이에서 많은 산업용 화학 물질 및 용매.

기술 도면



각 주문에 대한,Dervos 이 검사 보고서를 제공하여 전체 검사 프로세스 그리고 결과를 얻을 수 있습니다. Plus,우리가 자료를 제공할 것입 보고서 알려주는 소재 우리가 제공하는 따라 표준입니다.



메시지를 남길

에 관심이 있다면 우리의 제품과한 자세한 내용을 알고 싶다면,메시지를 남겨주십시오 여기,우리가 응답할 것입니다 당신은 빨리 우리가 할 수 있습니다.

관련 상품
클래스 150 플로팅 볼 밸브
알루미늄 청동 뜨 공 벨브 1 인치 150lb

1 인치 플로팅 타입 볼 밸브는 알루미늄 브론즈 c95800으로 제작되었습니다. 감소 된 보어 볼 밸브에는 레버 작동, rf 플랜지, 2 피스 타입 본체가 있습니다. 빠른 세부 사항 유형 볼 밸브 크기 1" 압력 아니 150 구성 떠 있는   볼, 2 피스 바디, 측면 입구, 보어 감소 연결 플랜지   종료 조작 지렛대   조작 신체   재료 알류미늄   청동 ASTM B148 C95800 미디어 w.o.g 볼 밸브에 사용 가능한 수정 공칭 압력 밸브 크기 -감소 된 포트 & amp; 풀 포트 -몸체, 볼, 스템, 시트, 패킹, 볼트 및 너트의 재질 밸브 작동 (레버, 기어 박스, 공압 또는 유압 또는 전기 액추에이터) 연결 유형 사용 가능한 확장 스템 맞춤형 코팅 및 포장 배수구 수정 dervos 포장 좋은 포장은 좋은 첫 인상을 의미합니다. 아래 두 개의 상자를 볼 때 어떻게 다르게 느끼는가? 그리고 당신은 왜 dervos에서 우리가 포장을 그렇게 중요하게 생각하는지 이유를 알 것입니다. dervos에서 우리는 1. 모든 밸브가 깨끗하고 건조합니다. 우리는 무엇을해야합니까? 포장하기 전에 밸브를 청소 녹슬지 않는 기름을 첨가하십시오 플랜지 커버 추가 납품에있는 벨브에 2.no 손상. 우리는 이것을 어떻게 달성합니까? 철 와이어로 밸브를 고정 부드러운 재료로 밸브를 분리하십시오. 합판을 가진 벨브를 층을 이루십시오 3.strong 상자 및 명확한 배송 표시

두 조각 캐스트 스틸 볼 밸브
캐스팅 2 피스 볼 밸브 4 인치 클래스 150 렌치

2 피스 타입 플로팅 볼 밸브 전체 포트, 화재 안전 설계, 안티 분출 스템, ANSI 150 플랜지 및 레버 작동. 탄소강 볼 밸브는 a216 wcb 바디, f316 스템 및 볼, ptfe 소프트 시트로 설계되었습니다. 빠른 세부 사항 유형 볼 밸브 크기 4 " 압력 150 파운드 구성 플로팅 타입   볼, 2 피스 바디, 풀 보어 연결 높인   면 플랜지 끝 조작 렌치   조작 신체   재료 캐스트 스틸   wcb 손질   재료 ss316 및 ptfe 디자인 표준 API 6D 압력   & amp; 임시 코드 asme b16.34 면 대면 asme b16.10 종료   연결 asme b16.5 검사   암호 API 6D 온도   범위 -29 ℃ ~ + 125 ℃ 미디어 물, 기름   가스 소재 & amp; 치수 아니 부품 이름 탄소   강철에서 ASTM으로 스테인리스   강철에서 ASTM으로 wcb lcb cf8 cf8m cf3 cf3m 1 신체 a216 화장실 a352 lcb a351 cf8 a351 cf8m a351 cf3 a351 cf3m 2 보닛 너트 a194 2 시간 a194 4 a194 8 삼 보닛 볼트 a193 b7 a320 l7 a193 b8 4 캡 a216 화장실 a352 lcb a351 cf8 a351 cf8m a351 cf3 a351 cf3m 5 틈 메우는 물건 ss 나선형 상처 / 흑연 또는   ss 나선형 상처 / ptfe 6 공 a105 / ep.cr 또는 f6 a182 f6 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 7 좌석 링 rptfe 또는 pom 8 작은 봄 스테인레스 9 작은 공 a182 f304 a182 f316l 10 줄기 a182 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 11 줄기 좌석 ptfe 12 줄기 포장 ptfe 또는 흑연 13 선 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 14 글 랜드 볼트 a193 b7 a193 b8 15 갈드 플랜지 a216 화장실 a351 cf8 16 포지셔닝 플레이트 강철 17 브렌치 a216 화장실 재료는   ASTM 표준에 따라 클래스 150 dn mm 15 20 25 40 50 65 80 100 150 200 250 nps 에 0.5 0.75 1 1.5 2 2.5 삼 4 6 8 10 엘 (rf) mm 108 117 127 165 178 191 203 229 394 457 533 에 4.25 4.6 5 6.5 7 7.5 8 9 15.5 18 21 l1 (bw) mm 140 152 165 190 216 241 283 305 457 521 559 에 5.5 6 6.5 7.48 8.5 9.5 11.13 12 18 20.5 22 l2 (rtj) mm 119 129.7 139.7 178 191 203 216 241 406 470 546 에 4.69 5.11 5.5 6.9 7.5 8 8.5 9.5 16 18.5 21.5 h mm 66 74 87 105 132 152 182 215 250 285 495 에 2.6 2.9 3.48 4.2 5.28 6.08 7.28 8.6 10 11.4 19.5 할 (w) mm 130 130 160 230 400 400 600 850 1100 1500 년 * 350 에 5.1 5.11 6.3 9 15.74 15.74 23.62 33.46 43.3 59 13.8 rf (kg) & emsp; 2.3 삼 4.5 7 15 20 25 40 97 160 240 bw (kg) & emsp; 2.0 2.5 3.8 5.8 12 17 21 36 92.8 154 227 * 웜 기어 또는 전동 액추에이터 작동 특별 시험 & amp; 검사 dervos는 정기적 인 유압 테스트 및 공기 테스트 외에도 pt 테스트, rt 테스트, ut 테스트, 극저온 테스트, 저 누출 테스트, 내화 테스트 및 경도 테스트 등과 같은 고객의 요청에 따라 특수 테스트를 수행 할 수 있습니다 .

DN100 WCB 볼 밸브
DIN 볼 밸브 DN100 PN16 WCB 부동 볼 가열 자켓

딘 볼 밸브 전체 기공 rf floaing 볼 화재 방지 정전기 방지 레버 wcb 바디 a105 + enp 볼 17-4ph 줄기 f304 + ni55 좌석 x750 봄 용접 플랜지 가열 재킷 dn100 pn16 빠른 세부 사항 유형 볼 밸브 크기 dn100 설계 압력 pn16 구성 플로팅 볼 밸브 연결 타입 올린 얼굴 플랜지 작업 유형 지렛대 바디 재료 wcb 공 재료 a105 + ni60 줄기 재료 17-4ph 시트 재료 f304 + ni55 디자인 코드 en12516-1 대면 치수 en558-1 연결 종료 en1092-1 b1 압력 및 온도 en12266 매질 물, 기름 및 가스 유래 중국

API 6D 볼 밸브 제조업체
API 6D 플로팅 볼 밸브 2 인치 600lb 확장 스템 A105

API 6D 볼 밸브는 지하 볼 밸브 또는 저온과 같은 특수 용도의 확장 스템 신청. 연장 된 줄기의 길이는 클라이언트의에 의하여 주문을 받아서 만들어 질 수 있습니다 의뢰. 빠른 세부 사항 유형 볼 밸브 크기 2 인치 압력 클래스 600 구성 스플릿   몸, 옆 입장, 뜨 유형, 내화성 디자인, 정전기 방지 체계,   폭발 방지 스템, 확장 보닛 연결 rf 플랜지 작동 모드 지렛대 바디 재료 a105n 트림 재료 SS304 볼 및 스템, RPTFE 시트 디자인 및 제조 API 6D 압력 및 임시 코드 asme b16.34 끝으로 종료 asme b16.10 연결 종료 asme b16.5 검사 API 6D,   API 598 온도 범위 -29 ℃ ~ + 200 ℃ 매질 기름,   수성 가스 dervos의 qc 프로세스 주조 검사 : 우리 급격한 주조와 같은 원료의 문제를 확인할 수 있습니다. 벽 두께, 화학 성분 등으로 인해 속이는 가공 검사 : -안전하게 하다 가공 정확도 -찾기 수리 시간을 더 많이 확보하기 위해 가능한 빨리 가공 실수를 재생 최종 검사 : -최종 검사 활동에는 문서 및 QC 기록이 포함됩니다 검토, 육안 검사, 치수 검사, 압력 테스트, 도장 및 포장 검사 -시간과 비용 절약 : 직접 방문해서 검사 할 필요가 없습니다. 모든 문서는 증거로 제공 될 수 있습니다. 검사 보고서는 다음을 포함하여 무료로 제공됩니다 : -en 10204 3.1 밀 테스트 인증서 전체 검사 과정을 보여주는 검사 보고서

 단조 스틸 a105 npt 볼 밸브
DN25 PN100 단조 스틸 A105 NPT 볼 밸브

DN25 PN100 단조 스틸 A105 NPT 연결 방식 2 개 구성 풀 포어 레버 작동 플로팅 볼 화재 안전 바디 및 보닛 A105 볼 A182 F304 시트 링 PTFE 스템 A182 F304 스템 O 링 바이 톤 패킹 흑연 글 랜드 스테인레스 스틸 디자인 및 제조 Asme B16.34 페이스 페이스 디자인 제조 표준 제조 표준 나사 및 치수 ansi b1.20.1 검사 및 테스트 API598 화재 안전 설계 API 607 빠른 세부 사항 유형 볼 밸브 크기 dn25 압력 pn100 구성 2 조각 연결 npt 작동 모드 지렛대 바디 재료 a105 덮개 a105 디자인 및 제조 asme b16.34 끝으로 종료 asme b16.10 연결 종료 ANSI B1.20.1 검사 API 598 온도 범위 -29 ℃ ~ + 538 ℃ 매질 기름, 물, 가스

다섯 개의 백성 중 하나
2 조각 플로팅 볼 밸브 WCB 150lb 4inch 감소 보어

API 6a에 따라 제작 된 2 피스 플로팅 볼 밸브는 보어 감소, 내화 설계, 폭발 방지 스템 설계를 갖추고 있습니다. rptfe 시트와 ptfe o 링이 장착 된 4 인치 wcb 밸브는 인증서를 제공합니다.

다섯 개의 백성 중 하나
JIS2 조각 부동 볼밸브 RF×NPT25A16K

이 공 벨브로 설계,ASME B16.34,기능 두 가지 다양한 연결 방법으로 한쪽 RF 및 다른 쪽 NPT. 밸브와 함께 떠 공 PTFE seat,SCS13 몸체와 다른 특징은 훌륭한 바다표범 어업 성과가 있습니다.

다섯 개의 백성 중 하나
2 인치 600LB API6D 볼 밸브 RF 전체 2 조각 구멍 유형

단조 강철 공 벨브로 만든 A105 체와 17 4PH 손 RTJ flange end 및 레버 작업입니다. 이동 볼밸브 기능을 신뢰할 수 있는 실링 성능고 쉽게 작업입니다.

다섯 개의 백성 중 하나
1 인치 3 피스 수동 볼 밸브 풀 보어

CF8M으로 제작 된 2 개 밸브는 ASME B16.34. 혼합 와 15 %의 유리 섬유, RPTFE 밸브의 시트는 고온 및 높은 부식성 작업 조건을 견딜 수 있습니다.

다섯 개의 백성 중 하나
플랜지 엔드 볼 밸브, ASTM A350 LF6, CL600, 1 / 2 인치, 두 조각

중국 플랜지 엔드 볼 밸브 Producer, Dervos는 플랜지 엔드 볼 밸브, ASTM A350 LF6, 클래스 600, 1 / 2 인치, 투피스, 단조, API 608, BS 5351, ASME B16.34.

다섯 개의 백성 중 하나
2 인치 CL300 2pc 플로팅 볼 밸브 전체 보어 1 / 2 " NPT (f) x 2" rf.

the 3000lb F316로 만들어진 볼 밸브 또는 F316L, 비대칭 엔드 구조, 끝은 npt 다른 반면 rf. -29 ℃ ~ 150 ℃에서 작동 할 수 있습니다.

볼 밸브
3 / 4 인치 ANSI 클래스 150 플로팅 볼 밸브 스테인레스 스틸

제자 PER API6D, 두 개의 PC. 플로팅 볼 밸브, 3 / 4inch 150lb, 다른 ends.find 부동 볼 밸브 또는 다른 밸브가 쉽게 Dervos.

메시지를 남겨주세요

    에 관심이 있다면 우리의 제품과한 자세한 내용을 알고 싶다면,메시지를 남겨주십시오 여기,우리가 응답할 것입니다 당신은 빨리 우리가 할 수 있습니다.

제품

접촉