한국의

한국의

Get a Quote
제품
  • >
  • 체크 밸브

  • >
  • 압력 씰 보닛 체크 밸브, ASTM A105N, 1 인치, 클래스 1500

핫 제품

회사 뉴스

How to Install the Valve Gasket?
How to Install the Valve Gasket?
2023-06-07

Sealing gasket is a commonly used sealing spare part for machinery, equipment, etc. It is a material that plays a sealing role. Correct installation can ensure sealing performance and smooth operation of the equipment, otherwise it will damage the sealing gasket. Next, let's take a specific look at what to do. The correct installation of gaskets should be carried out when the flange connection structure or threaded connection structure, sealing surface, and gasket have been inspected without any doubt, and other valve components are intact and undamaged. 1. Before installing the gasket, apply a layer of graphite powder or lubricant mixed with engine oil (or water) to the sealing surface, gasket, thread, and rotating parts of the bolt and nut. The gasket and graphite should be kept clean. 2. The gasket should be installed on the sealing surface in a moderate and correct manner, without deviation, and should not extend into the valve chamber or rest on the shoulder. 3. Only one gasket is allowed to be installed, and it is not allowed to install two or more gaskets between the sealing surfaces to eliminate insufficient clearance between the two sealing surfaces. 4. The sealing of elliptical gaskets should ensure that the inner and outer rings of the gasket come into contact, and the two ends of the gasket should not come into contact with the bottom of the groove. 5. The installation of the O-ring should not only meet the design requirements for the ring and groove, but also have an appropriate amount of compression. On the premise of ensuring sealing, the smaller the compression deformation rate, the better, which can extend the service life of the O-ring. 6. Before installing the gasket, the valve should be in the open position to avoid affecting installation and damaging the valve components. When covering, it should be aligned with the position and should not be pushed or pulled into contact with the gasket to avoid displacement and scratches on the gasket. 7. The installation of gaskets for bolted or threaded connections should ensure that the gaskets are in a horizontal position (threaded gaskets with wrench positions should not be used with pipe wrenches). 8. Before tightening the gasket, it is necessary to have a clear understanding of the pressure, temperature, properties of the medium, and material characteristics of the gasket to determine the pre tightening force. The preload should be minimized as much as possible without leakage during pressure testing. 9. After tightening the gasket, it is necessary to ensure that there is a pre tightening gap between the connecting parts in case of gasket leakage. 10. When working at high temperatures, bolts will experience high-temperature creep, stress relaxation, and increased deformation, leading to leakage at the gasket and requiring hot tightening. On the contrary, under low temperature conditions, bolts will shrink and require cold loosening. 11. When liquid sealing gaskets are used for sealin...

게이트 밸브와 글로브 밸브의 차이점은 무엇입니까?
게이트 밸브와 글로브 밸브의 차이점은 무엇입니까?
2023-05-31

많은 사람들은 게이트 밸브와 글로브 밸브 모두 미디어를 차단하는 기능이 있으므로 사용할 때 다르지 않다고 생각합니다. 실제로 실제 적용에서 게이트 밸브와 글로브 밸브 사이에는 특정 차이점이 있습니다. 게이트 밸브 및 구조도 글로브 밸브 및 구조도 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and better sealing performance. In steam systems and large diameter pipelines, gate valves with low fluid resistance are usually

Triple Eccentric Metal Hard Seal Butterfly Valve의 가공기술 및 구조적 특성 원문보기 KCI 원문보기 인용
Triple Eccentric Metal Hard Seal Butterfly Valve의 가공기술 및 구조적 특성 원문보기 KCI 원문보기 인용
2023-05-24

트리플 편심 메탈 하드 씰 버터 플라이 밸브는 고성능 밸브로서 내식성, 안정적인 밀봉 및 작은 개방 토크와 같은 장점이 있습니다. 밀봉 표면은 경사진 원추형 표면이며 밸브 본체 밀봉 링과 나비 플레이트 어셈블리 밀봉 링 사이의 접촉은 표면 접촉입니다. 작동 원리는 구동 장치의 토크로 나비 판 어셈블리를 직접 구동하여 나비 판 어셈블리의 밀봉 링이 밸브 본체 밀봉 링에 완전히 접촉하여 탄성 변형을 일으켜 밀봉하는 것입니다. 구조적 특성 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

다섯 개의 백성 중 하나
加载中...

압력 씰 보닛 체크 밸브, ASTM A105N, 1 인치, 클래스 1500

중국의 고압 체크 밸브 공급 업체는 Pressure-Seal 보닛 체크 밸브, ASTM A105N, 1 인치, 클래스 1500 LB, 단조 강철 리프트 체크 밸브.

  • 지불:

    30% when order confirmed, 70% before shipment
  • 제품 원산지:

    China
  • 색:

    Customization
  • 배송 포트:

    Shanghai, China
  • 리드 타임:

    30~60 days Ex Works after order confirmation
  • Material:

    ASTM A105N
  • Method of Operation:

    Non
지금 문의
제품 상세 정보

빠른 세부 사항 :
유형 : 압력 씰 보닛 체크 밸브.
재료 : ASTM A105N.
밸브 크기 : 1 인치
적용 가능한 압력 등급 : 클래스 1500 LB.
온도 등급 : 500 ℃까지.
성형 스타일 : 단조.


제품 범위 :
재료 : ASTM A105, ASTM A350 LF2, ASTM A182 F5, ASTM A182 F22, ASTM A182 F304, ASTM A182 F304L, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F347, ASTM A182 F321, ASTM A182 F51, ASTM A182 F55, 인코넬 합금, Monel 합금, Hastelloy 합금.
표준 : API 608, BS 5351, ASME B16.34 / B16.11 / B1.20.1 / B16.25.
밸브 크기 : 1 / 2 - 4 인치
적용 가능한 압력 등급 : 클래스 150 lb - 1500 LB.
온도 등급 : 500 ℃까지.
성형 스타일 : 단조.
단조 스틸 리프트 체크 밸브 - 압력 씰 덮개


표준 재료


부품 이름

기재

신체

ASTM A105, ASTM A350 LF2, ASTM A182 F5, ASTM A182 F22, ASTM A182 F304, ASTM A182 F304L, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F347, ASTM A182 F321, ASTM A182 F51, ASTM A182 F55, 인코넬 합금, Monel 합금, Hastelloy 합금.

보닛

ASTM A105, ASTM A350 LF2, ASTM A182 F5, ASTM A182 F22, ASTM A182 F304, ASTM A182 F304L, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F347, ASTM A182 F321, ASTM A182 F51, ASTM A182 F55, 인코넬 합금, Monel 합금, Hastelloy 합금.

좌석

ASTM A105 + hf

디스크

ASTM A276 420

추신 좌석

304 ss




압력 테스트 ( A105 )

수업

쉘 (psig)

뒷좌석 (psig)

좌석 (psig)

공기

1500LB

5575

-

-

4100

2500LB

9275

6800



설계 및 제조 준수 to : API 602, BS 5352, ASME B16.34 / B16.11 / B1.20.1 / B16.25.
구조 특징 :
★ 끝 연결 : 스레드, 소켓 용접 또는 맞대기 용접
★ 압력 씰 덮개
★ 감소 된 보어 / 풀 보어

약 Dervos
샤먼 Dervos 2008 년 6 월에 설립 된 valves industry Co., Ltd (재고 코드 861601)는 원 스톱 R & D, 제조, 자원 통합 및 무역 서비스를 통합 한 산업용 밸브 공급 업체 용 12 년, Dervos 산업 요구에 대한 솔루션을 찾고 일반 밸브와 특수 밸브 모두에 ​​전문적인 서비스를 제공하기 위해 최선을 다하고 있습니다.

메시지를 남길

에 관심이 있다면 우리의 제품과한 자세한 내용을 알고 싶다면,메시지를 남겨주십시오 여기,우리가 응답할 것입니다 당신은 빨리 우리가 할 수 있습니다.

관련 상품
다섯 개의 백성 중 하나
스테인리스 풋 밸브 2 ''class150 플랜지 끝

2 인치 150lb 풋 밸브는 스테인리스 스틸로 만들어졌습니다.

다섯 개의 백성 중 하나
2 인치 150lb 노즐 체크 밸브 LCB

2inch 축 방향 노즐 체크 밸브는 임계 공정에 대한 리턴 흐름이나 충격을 방지하기위한 선호되는 솔루션입니다. LCB를 감사드립니다 몸체, 밸브는 작동 온도가 낮아질 수 있습니다. -46 학위 섭씨.

다섯 개의 백성 중 하나
1 인치 ss F316 볼 체크 밸브 150LB rf

단순한 흐름으로 효율적이고 유지 보수가 거의 필요 없음 디자인, thestainless 스틸 볼 체크 밸브 일반적으로 수중 폐수 리프트 스테이션에서 지정되고 사용됩니다.

DN100 WCB 볼 밸브
DIN 볼 밸브 DN100 PN16 WCB 부동 볼 가열 자켓

딘 볼 밸브 전체 기공 rf floaing 볼 화재 방지 정전기 방지 레버 wcb 바디 a105 + enp 볼 17-4ph 줄기 f304 + ni55 좌석 x750 봄 용접 플랜지 가열 재킷 dn100 pn16 빠른 세부 사항 유형 볼 밸브 크기 dn100 설계 압력 pn16 구성 플로팅 볼 밸브 연결 타입 올린 얼굴 플랜지 작업 유형 지렛대 바디 재료 wcb 공 재료 a105 + ni60 줄기 재료 17-4ph 시트 재료 f304 + ni55 디자인 코드 en12516-1 대면 치수 en558-1 연결 종료 en1092-1 b1 압력 및 온도 en12266 매질 물, 기름 및 가스 유래 중국

압력 씰 보닛 게이트 밸브
씰 보닛 게이트 밸브 bw 8 인치 2500lb

8 인치 클래스 2500 게이트 밸브는 압력 실 보닛, 맞대기 용접 연결 및 기어 박스 작동으로 설계되었습니다. 8 인치 게이트 밸브에는 탄소강 wcb 본체와 트림 5가 있습니다. 빠른 세부 사항 유형 문   판막 크기 8 인치 설계 압력 아니   2500 구성 압력   실링 보닛, 플렉시블 웨지, 금속-금속 시트 연결 타입 대상   용접 (sw) 작업 유형 변속 장치   조작 바디 재료 a217   화장실 트림 재료 트림 5 디자인 코드 API 600 대면 치수 저 같은   b16.10 연결 종료 저 같은   b16.25 압력 및 온도 저 같은   b16.34 매질 물,   석유와 가스 유래 중국 치수 & amp; 재료 nps dn 수업 2 2 1/2 삼 4 6 8 10 12 14 16 18 20 24 50 65 80 100 150 200 250 300 350 400 450 500 600 l (rf) 900 파운드 368 419 381 457 610 737 838 965 1029 1130 & emsp; & emsp; & emsp; 1500 파운드 368 419 470 546 705 832 991 1130 1257 1384 & emsp; & emsp; & emsp; 2500 파운드 451 508 578 673 917 1022 1270 & emsp; & emsp; & emsp; & emsp; & emsp; & emsp; l1 (bw) 900 파운드 216 254 305 355 508 660 787 914 991 1092 1346 1473 1600 년 1500 파운드 216 254 305 406 559 711 864 991 1067 1194 1697 & emsp; & emsp; 2500 파운드 279 330 368 457 610 762 914 1041 1118 1245 & emsp; & emsp; & emsp; l2 (rtj) 900 파운드 371 422 384 460 613 740 841 968 1038 1140 & emsp; & emsp; & emsp; 1500 파운드 371 422 473 549 711 841 1000 1146 1276 1407 & emsp; & emsp; & emsp; 2500 파운드 454 514 584 683 927 1038 1292 & emsp; & emsp; & emsp; & emsp; & emsp; & emsp; h (오픈) 900 파운드 554 637 680 796 1084 1372 1494 1550 1960 2210 & emsp; & emsp; & emsp; 1500 파운드 554 637 767 875 1094 1372 1655 1834 2150 2260 2460 2721 2940 2500 파운드 610 654 753 850 1254 1374 1685 1894 2226 2382 2585 & emsp; & emsp; 승 900 파운드 300 350 350 400 560 460 * 610 * 610 * 610 * 760 * & emsp; & emsp; & emsp; 1500 파운드 300 450 450 560 305 * 460 * 610 * 610 * 760 * 760 * & emsp; & emsp; & emsp; 2500 파운드 500 500 600 600 460 * 460 * 610 * & emsp; & emsp; & emsp; & emsp; & emsp; & emsp; 무게 (rf) 900 파운드 50 84 92 154 341 622 950 1295 1720 2380 & emsp; & emsp; & emsp; 1500 파운드 60 91 128 182 394 795 1370 2120 2800 3870 & emsp; & emsp; & emsp; 2500 파운드 121 175 195 229 720 1295 2250 & emsp; & emsp; & emsp; & emsp; & emsp; & emsp; 무게 (bw) 900 파운드 39 64 82 120 266 524 760 1090 1450 2018 년 & emsp; & emsp; & emsp; 1500 파운드 46 71 85 130 292 578 974 1615 2010 년 2815 3315 4150 5219 2500 파운드 88 135 144 158 500 892 1550 1978 2580 3780 5988 & emsp; & emsp; * 수동 기어 오퍼레이터 권장 아니. 부품 wcb 화장실 화장실 c5 cf8 cf8m 1 신체 a216 화장실 a217 화장실 a217 화장실 a217 c5 a351 cf8 a351 cf8m 2 좌석 a182 f6a a182 f22 a182 f22 a182 f5 a182 f304 a182 f316 삼 쐐기 a216 화장실 a217 화장실 a217 화장실 a217 c5 a351 cf8 a351 cf8m 4 줄기 a182 f6a saehnv3 a182 f304 a182 f316 5 스터핑 박스 a216 화장실 a217 화장실 a217 화장실 a217 c5 a351 cf8 a351 cf8m 6 씰링 아니 316l 유연한 흑연 +316 7 스플릿 링 강철 f6 f6 f6 a182 f304 f316 8 백 링 강철 강철 강철 강철 ss ss 9 볼트 a193 b7 a193 b7 a193 b7 a193 b7 a193 b8 a193 b8 10 너트 a194 2 시간 a194 2 시간 a194 2 시간 a194 2 시간 a194 gr.8 a194 gr.8 11 멍에 a216 화장실 a217 화장실 a217 화장실 a217 c5 a351 cf8 a351 cf8m 12 볼트 a193 b7 a193 b7 a193 b7 a193 b7 a193 b8 a193 b8 13 너트 a194 2 시간 a194 2 시간 a194 2 시간 a194 2 시간 a194 gr.8 a194 gr.8 14 포장 판 아니 410 아니 410 아니 410 아니 410 ANSI 304 아니 316 15 포장 유연한 흑연   그리고 반지) 또는 ptfe 16 분할 핀 강철 강철 강철 강철 강철 강철 17 아이 볼트 a193 b7 a193 b7 a193 b7 a193 b7 a193 b8 a193 b8 18 선 a182 f6 a182 f6 a182 f6 a182 f6 a182 f304 a182 f316 19 글 랜드 플랜지 a105 a105 a105 a105 a182 f304 a182 f316 20 너트 a194 2 시간 a194 2 시간 a194 2 시간 a194 2 시간 a194 gr.8 a194 gr.8 21 마개 a193 b7 a193 b7 a193 b7 a193 b7 a193 b7 a193 b7 22 줄기 너트 ni- 레지스트 a439-d2 23 기어 박스 구입 한 24 보호자 강철 25 명찰 ANSI 304 26 대갈못 ANSI 304

다섯 개의 백성 중 하나
4inch 극저온 플로팅 볼 밸브 300lb rf 레버

api609에 따라 설계된 4 인치 극저온 볼 밸브에는 rptfe가 장착 된 많은 부품이 있으며 알려진 플라스틱 재료의 마찰 계수가 가장 낮고 내식성이 우수하여 밸브가 극한 상황을 처리 할 수 ​​있습니다.

트러 니언 타입 볼 밸브 플랜지 기어 박스
단조 스틸 트러 니언 장착 볼 밸브 12 인치 600lb

12 인치 600lb 트러 니언 장착 볼 밸브에는 api 607에 따른 기어 박스, rtj 플랜지, 화재 안전 설계가 있습니다. 3 피스 볼 밸브는 api 6d 당 설계되었습니다. 디자인 기능 & amp; 이익 1. 작은 흐름 저항은 적은 압력 강하를 의미합니다. 2. 간단한 밸브 구조와 경량 금속 재료 tcc, 위성, 스테인레스 스틸에서 연질 재료 ptfe, 테플론, 나일론, 픽 등 다양한 3. 씰링 재료 제공 금속 바다 표범 어업 및 연약한 바다 표범 어업의 4.good 성과 5. 밸브의 편리하고 신속한 작동 재생 가능한 좌석 반지 때문에 유지하게 쉬운 7. 밸브가 완전히 열리거나 닫히면 밸브 밀봉면이 중간 부식으로부터 격리됩니다. 크기와 압력 등급 측면에서 8. 광범위한 응용 빠른 세부 사항 유형 볼 밸브 크기 12 " 압력 클래스 600 구성 포이   장착 볼, 3 피스 타입, 측면 입구 연결 rf 플랜지 조작 기어   움직이는 신체   재료 ASTM A105 디자인 및   제조 API 6D 압력   & amp; 온도 asme b16.34 면 대면 asme b16.10 종료   연결 asme b16.5 테스트 & amp;   검사 코드 API 598 화재 안전 API 607 온도   범위 -29 ℃ ~ + 200 ℃ 매질 물, 기름   가스 유래 중국 재료 사양 아니 부품 이름 탄소   강철에서 ASTM으로 스테인리스   강철에서 ASTM으로 wcb lcb cf8 cf8m cf3 cf3m 1 언더 플레이트 wcb lcb cf8 cf8m cf3 cf3m 2 언더 플레이트 볼트 a193 b7 a320 l7 a193 b8 삼 포이 a182 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 4 신체 a216 화장실 a352 lcb a351 cf8 a351 cf8m a351 cf3 a351 cf3m 5 보닛 너트 a194 2 시간 a194 4 a194 8 6 보닛 볼트 a193 b7 a320 l7 a193 b8 7 캡 a216 화장실 a352 lcb a351 cf8 a351 cf8m a351 cf3 a351 cf3m 8 틈 메우는 물건 ss 나선형 상처 / 흑연 또는   ss 나선형 상처 / ptfe 9 샤프트 슬리브 ss / 흑연 10 좌석 링 rptfe 또는 pom 11 공 a105 / ep.cr 또는 f6 a182 f6 a351 cf8 a351 cf8m a351 cf3 a351 cf3m 12 좌석 a105 / ep.cr 또는 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 13 봄 17-17ph (인코넬   nace) ni-cr 합금 14 O 링 바이 톤 15 줄기 a182 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 16 씰링 커버 a182 f6 a182 f6 a182 f304 a182 f316 a182 f304l a182 f316l 17 O 링 바이 톤 18 기어 액츄에이터 & emsp; 재료는   ASTM 표준에 따라 관련 지식 플로팅과 트러 니언 볼 밸브의 차이점은 무엇입니까? 플로팅 볼 밸브의 볼 부분은 움직일 수 있습니다. 매체의 압력 하에서, 볼은 일정한 변위를 가지며 배출구 단부의 밀봉 표면을 가압하여 단단히 밀봉된다. 플로팅 구조는 크기가 작고 낮은 볼 밸브에 적합합니다. 중간 압력 등급. 트러 니언 장착 볼 밸브의 볼 부분이 고정되어 있습니다. 중간 압력 하에서, 플로팅 시트는 밀봉을 보장하기 위해 볼쪽으로 이동합니다. 트러 니언 장착 볼 밸브의 크기와 압력이 더 큰 경우가 종종 있습니다.

플로팅 볼 밸브
1 인치 800LB 플로팅 볼 밸브 스테인레스 스틸 SW

Dervos는 단일, 2개 및 3개 부품 구조의 다양한 볼 밸브를 제조합니다. 밸브는 전체 내경 및 일반 내경 설계로 제공되며 요구 사항을 충족하는 다양한 연결구 및 재질로 제공됩니다.

나비 형 밸브
42" 150LBS 세 편심 버터플라이 밸브 API609 CF8M

42" 150LBS 버터플라이 밸브는 API 609 표준에 따라 만들어집니다. 밸브 본체는 CF8M으로 만들어집니다. 삼중 편심, 다단 및 NACE의 구조적 특성을 가지고 있습니다. 연결 모드는 RF 플랜지이며 터빈 작동 모드가 있습니다.

3" 600LB Trunnion Mounted Ball Valve RF F304 API6D

3" 600LB ball valve is made according to API6D standard. The valve body is made of A182 F304. It has the structural characteristics of fixed ball, full bore, anti-fire and anti-static and anti-flying valve stem. Its connection mode is RF. And it has IP68 waterproof turbine box operation mode.

메시지를 남겨주세요

    에 관심이 있다면 우리의 제품과한 자세한 내용을 알고 싶다면,메시지를 남겨주십시오 여기,우리가 응답할 것입니다 당신은 빨리 우리가 할 수 있습니다.

제품

접촉