한국의

한국의

Get a Quote
검색
  • >
  • API 598 웨이퍼 체크 밸브

핫 제품

회사 뉴스

게이트 밸브와 글로브 밸브의 차이점은 무엇입니까?
게이트 밸브와 글로브 밸브의 차이점은 무엇입니까?
2023-05-31

많은 사람들은 게이트 밸브와 글로브 밸브 모두 미디어를 차단하는 기능이 있으므로 사용할 때 다르지 않다고 생각합니다. 실제로 실제 적용에서 게이트 밸브와 글로브 밸브 사이에는 특정 차이점이 있습니다. 게이트 밸브 및 구조도 글로브 밸브 및 구조도 1. Having different structures. Gate valves are more complex in structure, higher in height, and larger in size than globe valves. Gate valves are shorter and higher in appearance than globe valves. Especially, opening the stem gate valve requires a higher height. If the installation position of the valve is limited, it is necessary to choose rising stem and non-rising stem gate valves and remind everyone to pay attention. 2. When fully open, it has different flow resistance. The flow resistance coefficient of ordinary gate valves is approximately 0.08~0.12. The pressure loss during the operation of the gate valve medium is small, and the fluid flow resistance is small. Gate valves are usually suitable for working conditions where frequent opening and closing are not required and the gate is kept fully open or closed. It is not suitable for adjustment and throttling. The resistance coefficient of a regular globe valve is about 3.5-4.5, and the opening and closing forces are very small. The flow resistance of the shut-off valve throughout its entire stroke is very high, and the required driving force or torque is also much greater. But it is very suitable for regulation and throttling. 3. The flow direction of the medium inside the valve body is different. Gate valves have the same effect when viewed from both sides. When installing a shut-off valve, the medium can enter from below and above the valve core. 4. The sealing surface of the gate valve has a certain degree of self-sealing ability. The valve core is in close contact with the sealing surface of the valve seat through medium pressure, achieving sealing performance and no leakage. The sealing surfaces of the shut-off valve only come into contact with each other when fully closed, and the relative sliding amount between the forcibly closed valve core and the sealing surface is very small, so the wear of the sealing surface is also very small. 5. The maintenance procedures are different. The maintenance of gate valves is not applicable to on-site pipelines, but the seat and disc of most globe valves can be replaced online without the need to remove the entire valve from the pipeline (when the valve is not under pressure). This is very suitable for situations where valves and pipelines are welded together. Gate and globe valves are both fully open and fully closed valves. When selecting valves in the application process, attention should be paid to the characteristics of the valves. Globe valves are usually used for small pipelines and better sealing performance. In steam systems and large diameter pipelines, gate valves with low fluid resistance are usually

Triple Eccentric Metal Hard Seal Butterfly Valve의 가공기술 및 구조적 특성 원문보기 KCI 원문보기 인용
Triple Eccentric Metal Hard Seal Butterfly Valve의 가공기술 및 구조적 특성 원문보기 KCI 원문보기 인용
2023-05-24

트리플 편심 메탈 하드 씰 버터 플라이 밸브는 고성능 밸브로서 내식성, 안정적인 밀봉 및 작은 개방 토크와 같은 장점이 있습니다. 밀봉 표면은 경사진 원추형 표면이며 밸브 본체 밀봉 링과 나비 플레이트 어셈블리 밀봉 링 사이의 접촉은 표면 접촉입니다. 작동 원리는 구동 장치의 토크로 나비 판 어셈블리를 직접 구동하여 나비 판 어셈블리의 밀봉 링이 밸브 본체 밀봉 링에 완전히 접촉하여 탄성 변형을 일으켜 밀봉하는 것입니다. 구조적 특성 1. The hard sealed butterfly valve adopts a three eccentric hard sealing structure, with almost no wear on the valve seat and butterfly plate, and has a sealing function that becomes tighter as the valve is closed. 2. The sealing ring is made of stainless steel, which has the dual advantages of metal hard sealing and elastic sealing. Both at low and high temperatures, it has excellent sealing performance, corrosion resistance, and long service life. 3. The sealing surface of the butterfly plate adopts surfacing cobalt based hard alloy, which is wear-resistant and has a long service life. 4. The large-sized butterfly plate adopts a quilted frame structure, with high strength, large flow area, and small flow resistance. 5. According to user requirements, hard sealed butterfly valves can be designed with bidirectional sealing function. During installation, it is not limited by the flow direction of the medium or affected by spatial location, and can be installed in any direction. 6. The drive device can be installed in multiple workstations (rotating 90 ° or 180 °), making it easy for users to use. Processing Technology Based on the structural characteristics of the triple eccentric metal hard seal butterfly valve, the sealing ring of the butterfly plate assembly is a combination of stainless steel plate, asbestos plate, or graphite. The valve body sealing ring is made of hard alloy with high hardness, and it is difficult to control the cutting amount, making it difficult to process and shape in one go. Moreover, the roughness requirements for the machined surface are very high. To ensure processing requirements, the process is as follows: Rough machining of valve body or butterfly plate assembly →→ Valve body sealing ring is welded with hard alloy for insulation and heat treatment to eliminate thermal stress →→ Sealing surface of rough turning of upper tooling →→ Upper tooling precision turning sealing surface →→ Grinding sealing surface with upper grinding head →→ Boring shaft holes for valve body and butterfly plate assembly →→ Strength test sealing test

글로브 밸브가
글로브 밸브가 "로우 인 하이 아웃" 또는 "하이 인 로우 아웃" 중 어느 것이 더 낫습니까?
2023-05-18

글로브 밸브가 입구가 낮고 출구가 높은 이유는 무엇입니까 ? 글로브 밸브는 입구가 낮고 출구가 높도록 설계되어 흐름 저항을 줄이고 밸브를 열 때 수고를 덜 수 있습니다. 밸브가 동시에 닫히면 밸브 쉘과 밸브 커버 사이의 개스킷과 밸브 스템 주변의 패킹에 힘이 가해지지 않아 수명이 연장되고 매체에 노출되지 않아 누출 가능성이 줄어 듭니다. 오랜 시간 동안 압력과 온도. 또한 밸브를 닫은 상태에서 패킹을 교체하거나 추가할 수 있어 유지보수가 용이합니다. 많은 사람들은 글로브 밸브가 로우 인 및 하이 아웃 이라고 생각 하지만 실제로 글로브 밸브가 하이 인 및 로우 아웃인 특수한 상황도 있습니다. 1. 직경 100mm 이상의 고압 글로브 밸브 대구경 밸브의 밀봉 성능이 좋지 않기 때문에 이 방법을 사용하여 밸브를 닫힌 상태에서 정지시킬 때 중간 압력이 밸브 디스크에 작용하여 밸브의 밀봉 성능을 향상시킵니다. 2. 바이패스 파이프라인에 직렬로 연결된 2개의 글로브 밸브, 두 번째 글로브 밸브는 "높은 흡입구 및 낮은 배출구"가 필요합니다. 유지보수 주기 내에서 밸브의 기밀성을 보장하기 위해 자주 열리고 닫히는 밸브에는 2개의 직렬 글로브 밸브를 설치해야 합니다. 바이패스 시스템의 경우 이 바이패스의 설치 기능은 다음과 같습니다. ① 메인 파이프라인 밸브 전후의 압력 균형을 유지하여 쉽게 열 수 있고 노동력을 절약하며 메인 파이프라인 밸브의 마모를 줄입니다. ② 시작하는 동안 중소 유량의 파이프를 예열합니다. ③ 주 급수배관에는 보일러 수압 시험을 위한 보일러 압력 상승 속도를 조절하기 위해 물의 흐름을 조절한다. 바이패스 글로브 밸브는 매체 흐름의 방향에 따라 1차 밸브와 2차 밸브로 구분됩니다. 장치의 정상 작동 중에는 기본 및 보조 밸브가 닫히고 둘 다 매체와 직접 접촉하게 됩니다. 2차 밸브 쉘과 밸브 커버 사이의 개스킷과 밸브 스템 주변의 패킹이 장시간 매체 및 온도 영향을 받는 것을 방지하고 작동 중 밸브 패킹을 교체하기 위해 필요한 설치 방향은 보조 밸브는 "하이 인 및 로우 아웃"입니다. 3. 보일러 배기 및 벤트 글로브 밸브 보일러 배기 및 벤트 글로브 밸브는 작은 개폐 빈도로 보일러 시동 중 물 공급 프로세스 중에만 사용됩니다. 그러나 밀봉 불량으로 인해 종종 유체 손실이 발생합니다. 따라서 일부 발전소에서는 기밀성을 향상시키기 위해 이러한 글로브 밸브를 "높은 입구 및 낮은 출구" 방향으로 설치했습니다. 일반적으로 대구경 및 고압 조건에서 낮은 입구 및 높은 출구 방법을 사용할 때 밸브

메시지를 남겨주세요

    에 관심이 있다면 우리의 제품과한 자세한 내용을 알고 싶다면,메시지를 남겨주십시오 여기,우리가 응답할 것입니다 당신은 빨리 우리가 할 수 있습니다.

제품

접촉